Question: How Do I Reset My Lorex DVR Admin Password?

How do I reset my h264 DVR to factory settings?

Factory Reset InstructionsFirst, make sure that the unit is turned off.Then press and hold any button on the included infrared remote control.While holding the button on the remote, power on the unit.You should hear a single beep followed by a double beep.

Now that the DVR is booted, it will be set to the factory default settings..

How do I reset my avtech DVR to factory settings?

AVTECH DVRs resetWith a tweezers close the contact between the pins.Turn on the DVR and wait until you hear a beep.Remove the tweezers while the DVR is still on.Wait until the DVR restarts.Use the admin/username and password to login.

Where is the reset button on a Lorex camera?

Locate the reset button. For W281AA Series, the reset button is located at the top of the camera. Step 2. Press and hold the reset button for 10 seconds until the chime sounds to reset the camera.

How do I find my Lorex password?

Forgot Your Password? You can reset the password for your Lorex account by entering your Email address. A verification email will be sent to you with a verification code.

How do I reset the password on my DVR?

To reset password of your CCTV DVR press and hold the ENTER button for 15 to 30 second until the DVR restart’s. After the restart you DVR default wizard will come up the same way like if you are setting up the DVR for the first time.

How do I reset my Xmeye DVR to factory settings?

Factory Reset InstructionsFirst, make sure that the unit is turned off.Then press and hold any button on the included infrared remote control.While holding the button on the remote, power on the unit.You should hear a single beep followed by a double beep. … Now that the DVR is booted, it will be set to the factory default settings.

How do I reset my Lorex DVR without monitor?

To reset your monitor connection:Power off the monitor.Power cycle your DVR / NVR. To power cycle your DVR / NVR, please power off and disconnect the power source for approximately 30 seconds. Reconnect the power source.Power on your monitor.Power on your DVR / NVR system.

What is the default password for Lorex DVR?

A: The default user name for the DVR is admin and the default password is 000000. Passwords are disabled by default, but are required to access certain local DVR functions. The DVR has seperate passwords for remote connection using a web browser or mobile device (such as a smartphone or tablet).

How do I reset my Lorex DVR?

To restore an LHV / LNR Series DVR / NVR to default settings:Right-click on the Live View to access the Quick Menu.Click Main Menu and then click the Setting icon ( ).Click Setting > Default.Check the menus to be restored to default settings.Click Apply to save the settings, and then click OK to exit.

How do I reset my DVR to factory settings?

Factory Reset InstructionsFirst, make sure that the unit is turned off.Then press and hold any button on the included infrared remote control.While holding the button on the remote, power on the unit.You should hear a single beep followed by a double beep. … Now that the DVR is booted, it will be set to the factory default settings.

What is Lorex admin password?

A: The default user name for the DVR is admin and the default password is 000000. Passwords are disabled by default, but are required to access certain local DVR functions. The DVR has seperate passwords for remote connection using a web browser or mobile device (such as a smartphone or tablet).

How do I reset my NVR admin password?

Method 1. Reset the Password by Pressing the Reset ButtonReboot your device and make sure you can see the live-view on the monitor screen.Remove the outer casing of the NVR using the screwdriver.Press the Reset button for 10 seconds until you hear the buzzing “bee”.

What is the default password of DVR?

The default passwords for your DVR or NVR are the same as the username. Therefore, the default password for the 888888 User is 888888, the default password for the admin User is admin and the default password for the 666666 User is 666666.

How do I log into my Lorex DVR?

To log in and set up your Lorex Client 11 software:Launch the Lorex Client 11 software on your computer.In the IP Address field, enter the DDNS or local IP address of your DVR.Enter your User Name.Enter the Password.Enter the Client Port value (default: 9000).Click Login.

How do I reset my Lorex admin password?

If you forget the password to the system, you can reset it using the Lorex Secure app (see REFERENCE for details). If you have not set up remote access using the Lorex Secure app, you will need to contact technical support to reset your password.